Mark Knopfler’s Morley Volume Pedal

After the other article about Knopfler’s Ernie Ball volume pedal, this time I want to feature the volume pedal he played before, which means during the Dire Straits days until the end of the Making Movies tour in 1981. The pedal I am talking about is the silver Morley Volume Pedal.

Morley made a whole range of effect foot pedals, including a very popular wha-wha or even models with built-in flanger or delay. All of these could be used as simple volume pedal as well. Knopfler’s model, simply called “VOL”, was just the ordinary volume pedal.

The unique thing about those Morleys was that they did not use a poti  but a photo resistor instead. The advantage: potis tend to make noise after some years of usage, the photo resistor will not, no matter how much you use or even misuse it (dusty or smoky stages, humidity etc.)

What sounds rather complicated was in reality an extremely simple circuit: a small bulb  – the one behind the red jewel light that is also used as power indicator – shines on a photo resistor (LCR) which lets the guitar signal pass as long as it receives light. When you roll back the pedal, a piece of black cloth is pushed between the bulb and the photo resistor which reduces the volume of the guitar accordingly. That’s all! Well, the simple ideas are often the best

The bulb (right) shines on the LCR (center), if this is not covered by the cloth

As the bulb needs electric power, the pedal is powered via mains line voltage, no external 9V adaptor like modern pedals! Since the power indicator bulb is part of the circuit, it means when it blows the pedal is dead. Fortunately replacing the bulb is simple and cheap.

The pedal way is extremely long. This means you can control the volume precisely, but you have to move your feet quite a lot. You get used to this, I have no problems with it. You can adjust how quickly or slowly the pedal reacts with a screw that changes the position of that black cloth. And you can adjust how easily the pedal moves with the two screws that hold the pedal. The whole thing is very stable, you can rest your foot with a lot of weight on it without problems.

One thing that is remarkable is that the pedal changes the sound, even when pushed down completely (full volume). This is due to the – compared with other guitar gear – extremely low input impedance which dampens the resonance peak of any passive guitar pick-up. It sweetens the sound of a Stratocaster pick-up. Without it that Dire Straits sound would definitely have been harsher.

Vintage Morley on stock in our shop !

29 thoughts on “Mark Knopfler’s Morley Volume Pedal

  1. Hi Ingo,

    I finally got the time this weekend to get it plugged in and well what a great pedal this is, I have an old Ernie ball so I wasn’t expecting much different and really bought this out of curiosity and the look of the thing.

    1. It really has a violin affect, warm and smooth, it makes my Boss DDS-3 sound better strangely.
    2. I always struggled a bit with the solo in Lions (first note or two with the bridge pu) as it was too harsh a sound, this gets that wonderful horn sound with a beautiful transition as the volume is raised.
    3. You can rest your right leg in a more cocked position than the Ernie ball which feels more comfortable and supports the guitar better with the top of the thigh. (important that ;-))
    4. When you hear this it’s only then you appreciated what is on the record, it’s fantastic when used at the end of a string bend too, really soulful.

    It was your site back in the day that made think about getting a Morley, and then got side tracked with an Ernie ball and now you supplied one.

    Thanks a million,
    Dermot.

  2. Nice article Ingo! That cloth thing in the Morley is just not quite clear to me though. Could you please post a pic that shows a larger part of the pedal inside, so I can see what moves against what and how? Also, could you please draw a schematics for this pedal? Or at least measure the resistance of that LDR, or give me its type. I’d like to build an opto-volume pedal! 🙂
    Sorry for the lot of questions, keep up the great site and keep on pickin’!

    Roland

  3. Hi Ingo!,
    I´m interested in the pedal that you have, I live in Spain.
    Mail me, to send me all the details.
    Congratulations for your site. it´s great.

  4. Hi there Ingo,

    If you have any of your Morley Volume pedals left for sale I would be very interested – please let me know.

    Thanks,
    Andy (UK)

  5. Hi Andy,

    yes, I have. Please use the contact form of this site (under ‘Pages’) again, and I will reply via email then to tell you the details.

    Ingo

  6. Hi Ingo,

    Having had a chance now to play with the pedal I would just echo Dermots analysis – a very smooth precise transition cen be achieved and it sounds great. The long pedal throw is easy to adjust to also. Thoroughly recommended.

  7. Hello Ingo
    I have enjoyed the information on knopfler. I find the tone on sultans to be a holy grail of sorts -not unlike many people. I heard Muff Winwood used an aural exciter on the first album and bought one myself. I know they make a foot pedal now as well. Have you ever used one?

    I recently purchased some bare knuckle pickups that I’ll be putting into my 50’s strat reissue. I’ll let you know how they sound if you’re interested.

    I take it that live in Germany. I live in California and teach history at a local school. You have a place to stay if you ever want to come and visit.
    cheers
    karl

  8. Hi Karl,

    the info about the Aphex Exciter on album one is not really confirmed. I have never tried the floor version myself, but I think Dermot has it.

    I heard some good things about the bare knuckle PUs but have not tried them either.

    “You have a place to stay if you ever want to come and visit.” That’s very kind of you 🙂

  9. Hi Ingo,
    if you have any pedal left please let me know, it will be with shipping to France.
    Your site is a well of information, Congratulations!!!

  10. Hi Ingo,
    I’ve been looking for the Knopfler Morley volume pedal for a long time and would very much like to purchase one from you if you have any left! I’m a professional guitarist and live in Ireland. Like Karl said above, if you ever come to Ireland, you’re more than welcome to come stay, play and talk all things music. By the way; your site’s great and thanks for all the hard work you put into it. I’m sure it’s much appreciated by many people.
    Take care and look forward to hearing from you.
    All the best,
    Doug

  11. Hi Ingo

    Peter from Sweden here,if u have any Morley left,pls let me now.Great job,great site\s

    regards
    Peter Fransson
    Krokstrand
    Sweden
    e-mail:peter-fransson@telia.com

  12. Hi Ingo,

    Really appreciate your site, the information is very useful.

    I have a question re: “I observed that the input impedance is not the same for models from different years. The ones I am selling are definitely the same value as Knopfler`s.”

    Could you describe how to measure this value, and what the value is for Knopflers pedal? I have a couple these pedals, one of which I want to restore, and I’d be interested to find out where they are in terms of this.

    Thanks & kindest regards!

  13. hi just wondering if you have any more of the morley vol pedals left if not please
    let me no as i been trying to get one for ages love the site great info

    kind regards gt

  14. I recently sold the last silver Morley, but there is a black one in the shop which is almost identical (it is not one of the later black ones that were totally different)

  15. Thank you for such an amazing blog. Could you please please please recommend where I could get one of these? Is there a modern alternative? Keep up the good work! Thank you

  16. I have a Morley Volume which I bought in early 1970s,I re-taped the cloth 5 years ago after not using this pedal for over 10 years,It still works perfect,The metal sticker with MORLEY is taped on,the glue dried years ago and I didn`t want to lose it.A great pedal.Andrew

Leave a Reply to Peter Fransson Cancel reply

Your email address will not be published. Required fields are marked *