Building a Telecaster Dream Machine – Part 4 – Brass Hardware

Posted on 5 CommentsPosted in Guitar in general, Guitars

It is a while ago that I started my Tele Dream Machine project. The project advanced and got to a stage where I had a playable fine instrument some months ago (which can be seen e.g. here when I was demoing the Walk  of Life pickups with this guitar). However, various parts were not finished yet, mainly as I was missing some of the required brass parts. Meanwhile I have (almost) all I need to finish the project.

Let’s start with the control plate. The one you can see in the demo video was a gold-plated one, bought rather cheap on ebay. Unfortunately it did not fit properly into the contour of the pickguard but even overlapped the pickguard (see picture).

control-plate-1
The no-name control plate was too wide to fit into the contour of the pickguard
control-plate-2
The one on top is not only too wide, also the positions of the pots and the size of the switch slot are different to mine – needless to say which one is the correct way.

Was my brass Tele pickguard wrong or the plate too wide? Of course it was the plate, what shows us that you can never trust no-name products to be compatible to the standard specs. Besides, the gold-plated steel looks a bit different than the polished brass on Van Nuy era Schecter Dream Machines. Well, if I can produce brass pickguards I should be able to produce brass control plates I thought, and this is what I did. I made a few more, and chrome-plated some of them to go along with my white aluminium Tele pickguards for a real “Walk of Life red Tele clone” set (with pickups, pickguard and wired controls, coming very soon, I basically only have to take some pictures  to put it into the online shop). By the way, it is not that you cannot get chrome-plated ones everywhere, but try to find one of chrome-plated brass instead of steel …  – and it has to be brass for an “authentic” Dream Machine clone!

control-plate-3
Here it is, fitting properly now, and with the right switch button

 

So here is the picture with my brass control plate. I also added the switch tip button (which was missing on the video): Schecter had these round black Tele buttons, but occasionally also Strat-style tips of brass.

While doing the brass plates, I also made the serial number plates, of chrome-plated brass and – brandnew – polished brass, vintage-correct clear laquer coated, with the S8001 serial number. I replaced the gold-plated steel plate I had on the guitar (without any number) with this one for the vintage-correct look, with an S serial number of the correct size, font, and at the correct position.

Please note that I only made these with three serial numbers of Mark’s most famous Dream Machines (red Strat, red Tele, sunburst Strat, plus the two red Dire Straits Fender Strats ), no other numbers are available, or will be. The idea here is to have the right-looking part without a danger of misuse,  not providing the possibility to fake a Dream Machine and sell it as original. I mean faking one and insstalling one of  the most famous serial numbers is like faking a pre-CBS Strat and give it the 0001 serial number of David Gilmour’s famous blonde Strat – cannot fool anyone.

SNO-DM-Tele
An S8-serial number – without danger of misuse

The next thing I did was to replace the original vintage NOS Schecter bridge that I bought for a fortune a while ago with one of “my” new Dream Machine style bridges. As I copied all important Dream Machine specs and made sure to have it milled from best quality solid brass (nothing die cast), the sound will be identical but the look fits better to the other parts – the Schecter bridge has darkened with age, being about 35 years old (see one of the pictures above).

WoL-bridge-brass-1
The Walk of Life brass bridge

Last not least a few words on the three (!) strap buttons of the Dream Machines (most of them had three but there were also some with two, even in the 1980 Schecter catalogue). My mahogany body already had two holes at the usual positions, so I had to drill two new holes. I used a piece of tape and drilled through it to avoid crackling of wood or finish, something very important when drilling into a laquered body! The distance of these is about 9.5 cm (3  3/4 “) on my guitar. Only thing left to do: filling the unused hole. I used normal gold-plated strap buttons for now. Unfortunately these look rather different to the original ones which were made of raw brass, without laquer and rather dull looking for this reason. Thinking about it, it should not be impossible to make these from raw brass myself …  Well,  let’s leave something for the future 🙂

DM-Tele-1
Only some very last details missing…

Watch out for the the next blog post in this Building a Telecaster Dream Machine series with the full photo album of the final guitar.

"Buy me a beer" - donate for the site via PayPal. Or buy a backing track in my online shop 🙂